Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Replacement for Fort Myers Homeowners
A furnace that has started short-cycling, rattling, or leaving cold spots in the back bedrooms is telling you something. When repairs stop making financial sense, replacement is the honest answer, and getting it right matters here. Fort Myers winters are mild, so furnaces here run fewer hours than they do up north, but the humidity and the long cooling season put their own wear on a system. Our technicians have up to 9 years of experience, and they’ve learned to spot the difference between a furnace worth fixing and one that’s finished. We install and service nine major brands, so the recommendation you get is built around your home and budget, not a manufacturer’s sales target. If your system is failing, call (833) 946-8616. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

What Our Furnace Replacement Service Includes
Load Assessment and Equipment Sizing
Before any equipment is ordered, we work out how much heat your home actually needs. That means measuring square footage, checking insulation and window performance, and looking at how the ductwork is laid out. An oversized furnace short-cycles and wastes fuel; an undersized one never catches up on a cool morning. Getting this step right is the single biggest factor in how satisfied you’ll be with the new system.
Removal and Disposal of the Old Unit
The existing furnace has to come out cleanly, and that includes disconnecting the flue, the gas line, and the electrical supply safely. We handle the removal and haul-away of the old equipment so you’re not left figuring out what to do with a several-hundred-pound box. Any related components that need swapping at the same time, like the venting or a corroded connector, get flagged before we start so there are no surprises mid-job.
New Furnace Installation
Installation covers setting the unit, connecting the gas and electrical, sealing the duct connections tight, and testing the whole system through a full heating cycle. We check gas pressure, airflow, and temperature rise against the manufacturer’s spec, because a furnace that’s installed correctly runs quieter and lasts longer. If your home also needs cooling work, we handle Blackwell Air Conditioning services on both sides of the system so you’re not juggling two contractors.
Thermostat and Controls Check
A new furnace deserves controls that actually talk to it. We verify your thermostat is compatible and configured for the new equipment, and we walk you through the settings that matter. If your existing thermostat is aging or doesn’t support the features your new unit offers, we’ll tell you plainly rather than leave you guessing.
Post-Install Commissioning and Walkthrough
Once everything is connected, we run the system and confirm it’s delivering what the load calculation promised. Then we walk you through the filter location, the basics of what to watch for, and how to reach us if something doesn’t feel right. You leave the job knowing how your new furnace works, not just that it’s installed.
Repair-First Philosophy
We repair before we recommend replacement. Replacement is the right call when the heat exchanger is compromised, when repairs pile up faster than the equipment can justify, or when the system is simply past the point of reliable service. When a repair makes sense, we say so, even though a replacement would be a bigger ticket. That approach costs us jobs and earns us repeat customers.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Brands We Service for Furnace Replacement
We’re certified to install and service nine leading HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That spread covers premium, mid-range, and value tiers, which means we can match equipment to your budget instead of steering you toward whatever line pays the best commission. With Carrier equipment, we know where the ignition and control components tend to wear and what to check first when a unit starts acting up. Daikin units have their own quirks around airflow and setup, and we’ve learned to size and configure them so they perform the way they should in a Fort Myers home.
Bryant and American Standard both sit in that dependable mid-range territory, and we can speak to what each one does well and where the trade-offs are. If you’re comparing a premium Carrier system against a value-tier Goodman, we’ll lay out the honest differences in efficiency, expected service life, and upfront cost. We work on all of them, so the conversation stays about your home’s load requirements and what you want to spend. Whether you have Carrier or any other make, we can help.
Signs You Need Furnace Replacement Right Now
- A cracked or compromised heat exchanger. This is the one finding that turns a repair into a replacement almost every time. A failing heat exchanger can allow combustion gases into your home’s air supply, which is a genuine safety concern. If a technician flags it, take it seriously and don’t put off the swap.
- Repairs that keep stacking up. One repair in a season is normal. Three in two years, on a system that’s already well into its service life, usually means you’re funding the next failure instead of fixing this one. Add up what you’ve spent and compare it to replacement cost before you decide.
- Rising energy bills with no other explanation. A furnace that’s lost efficiency works harder to deliver the same heat. If your gas bills have crept up and your usage habits haven’t changed, the equipment may be the reason. A tune-up can sometimes recover that lost efficiency; if it can’t, replacement becomes the cheaper path over time.
- Uneven heat and cold rooms. A furnace that heats the front of the house fine but can’t reach the back bedrooms may be undersized, or it may be losing capacity as it ages. Either way, a load assessment tells you whether the fix is ductwork, equipment, or both.
- Strange noises or smells on startup. Banging, rumbling, or a persistent metallic smell when the furnace kicks on are worth a look right away. Some of these are minor and fixable; others point to internal problems that get more expensive the longer they run.
Our Furnace Replacement Process – Step by Step
- 1
Call and schedule. You describe what the furnace is doing, and we book a visit. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. If it’s a repair question first, we’ll treat it that way.
- 2
On-site assessment and load calculation. We inspect the existing system, measure the home, and check the ductwork. For a straight replacement, we confirm the sizing matches your home; where the old unit was wrong-sized, we correct that in the plan.
- 3
Written estimate with equipment options. You get a clear written estimate covering the equipment, labor, and any related components. We lay out two or three options across different brands and tiers so you can see the real trade-offs, and the written estimate sets the final price.
- 4
Scheduled installation. Replacement work is planned, not rushed. Once you approve, we order the equipment and set an install date that works for you. The crew handles removal, installation, gas and electrical connections, and venting, and we test the full system before we call it done.
- 5
Commissioning and follow-up. We verify temperature rise, gas pressure, and airflow against spec, walk you through the new equipment, and leave you with a clear path to reach us if anything needs attention. Heating and cooling, handled together, means one contractor for the life of the system.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Furnace Replacement Cost in Fort Myers?
Furnace repair in Fort Myers typically runs $150 – $700 depending on the part and the diagnosis, and that range often decides whether replacement is worth considering. A full replacement isn’t a figure we quote blind, because cost swings widely with equipment tier, home size, and how much ductwork needs attention. For comparison, AC installation here typically runs $3,500 – $7,500, and furnace replacement follows similar logic: a value-tier unit in a smaller home lands near the bottom of that range, while a premium Carrier or Trane system with duct corrections pushes toward the top.
What affects the number most: the furnace’s capacity and efficiency rating, whether venting needs to be modified, whether the ductwork is leaking or undersized, and whether gas line or electrical work is needed to bring things up to code. You avoid overpaying by getting a written estimate before any work starts, asking what’s included in the equipment price and what’s extra, and comparing options across more than one brand rather than accepting a single quote.

Every estimate from us is free and no-obligation. It covers the load assessment, a clear line-item breakdown, and the equipment options laid out side by side, so you can see exactly what you’re paying for. The written estimate sets the final price, with no upsell added after the fact. Call (833) 946-8616 for an exact quote.
Furnace Replacement Near Fort Myers – Our Service Area
We work across Fort Myers and the surrounding communities, including Pine Manor, Whiskey Creek, Villas, Suncoast Estates, Cypress Lake, Iona, Estero, Fort Myers Beach, and St. James City. Response times depend on where you are and how the schedule looks, but we keep dispatch moving from 7am to 7pm, Sunday through Friday. If you’re in one of the outlying communities and want a realistic window, call and we’ll tell you straight. Our full Fort Myers coverage page has the details on how we reach your neighborhood.
Serving Fort Myers, FL – Our Local Coverage Area
We serve Fort Myers and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Furnace Replacement in Fort Myers
Furnace replacement is removing a failing heating unit and installing a new one sized to your home. It covers the load calculation, removal and disposal of the old equipment, installation, gas and electrical connections, and testing the system through a full cycle. It’s different from a repair, which fixes a specific part on the existing unit. If a repair will keep your current furnace running reliably, we’ll tell you that instead.
Most replacements are completed in a single day once the equipment is on hand, though larger homes or jobs that need ductwork or venting corrections can take longer. The assessment and estimate happen first, then we order the equipment and set an install date. You’ll know the expected timeline before you commit. Call (833) 946-8616 to get started.
Furnace replacement in Fort Myers depends on equipment tier, home size, and whether ductwork needs correcting, so there’s no single figure. For context, furnace repair here typically runs $150 – $700, and a full replacement sits well above that depending on the system you choose. We give you a written estimate with options across brands so you can see the real spread. The estimate is free, and the written estimate sets the final price. Call for an exact quote.
Yes. We’re certified across nine major brands, including Carrier, Daikin, Bryant, American Standard, Trane, Lennox, Goodman, Rheem, and York. That coverage spans premium, mid-range, and value tiers, so you get real options rather than a single line pushed by a single dealer. Brand-neutral recommendations mean the equipment is chosen around your home’s load requirements and your budget. Call and we’ll talk through which tier fits your situation.
Same-day service is often possible for repair calls, though furnace replacement itself is scheduled work that depends on equipment availability. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday; we’re closed Saturday. If your furnace fails and you call outside dispatch hours, we book you into the next opening. Call (833) 946-8616 and we’ll get you on the schedule.
Warranty coverage comes from the equipment manufacturer, and the terms vary by brand and tier, so ask for the specific warranty details on the unit you’re considering. We’ll walk you through what’s covered and for how long on each option in your estimate. Labor coverage is separate and depends on the job, so we spell that out too. Nothing about warranty should be a surprise after the install is done.
Clear access to the furnace and the surrounding area, and make sure the path from the door to the unit is open for the crew and the equipment. If you have pets, plan to keep them away from the work area for the day. Beyond that, you don’t need to do much; we handle the disconnection, removal, installation, and cleanup. We’ll confirm any specifics when we set your install date.
Schedule Your Furnace Replacement Service in Fort Myers Today
If your furnace is on its last legs, don’t wait for it to quit on a cold morning. Call (833) 946-8616 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a written estimate, options across nine major brands, and the right system for your home, not our vendor contract.
Written by the team at Blackwell Air Conditioning.