AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Repair for Fort Myers Homeowners
When your furnace quits, the problem is rarely dramatic – it’s a weak flame, a blower that runs cold, or a heat cycle that starts and stops without ever warming the house. In Fort Myers, where furnace use is light but real, small faults linger for months before anyone notices, then surface on the first genuinely cold morning. We handle furnace repair across every major brand we service, so you’re not stuck waiting on a contractor who only stocks one manufacturer’s parts. Our technicians have up to 9 years of experience diagnosing ignition, airflow, and control faults on gas and electric equipment, and we work on Daikin, Bryant, Carrier, and American Standard systems among others. Same-day service is available, and estimates are free. Call (833) 946-8616 – we answer 24/7. Fast dispatch from 7am to 7pm.

Furnace Maintenance
Furnace Maintenance is the scheduled cleaning and inspection that keeps a heating system running through the handful of cold snaps Fort Myers gets each winter, and it’s what you book when the unit still works but hasn’t been looked at in a year or more. We check the burners, heat exchanger, blower assembly, flue path, and electrical connections, then test the thermostat cycle so we know the furnace actually reaches setpoint rather than just lighting. Maintenance in Fort Myers typically runs $80-$200, and the written estimate sets the final price. We schedule it before the first cold front, not after a failure. If anything turns up, we explain it and quote the repair separately – maintenance is diagnostic, not a sales visit.
What a Maintenance Visit Covers
We clean the burners and flame sensor, verify the draft, inspect the heat exchanger for cracks, and measure the temperature rise across the unit against its rating. A furnace running outside its rated rise wastes gas and shortens the blower’s life. You get a written report of what we found and what, if anything, needs attention.
How Often to Schedule
Once a year is the right rhythm for a Fort Myers furnace, even though it runs far less than a northern system. Dust, humidity, and long idle stretches between cold snaps are what degrade components here. Skipping a year is usually fine; skipping three is how you find a seized blower in January.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Heat Pump Repair
Heat Pump Repair covers the heating cycle of a system that also cools your home, and in Fort Myers that’s most of the year’s equipment. It’s needed when the unit blows cool air in heat mode, defrosts constantly, or trips the breaker the moment the reversing valve engages. Because a heat pump shares components between heating and cooling, a heating fault often points to a sensor or valve problem that would have shown up in summer cooling too. We diagnose with gauge readings, amp draw, and control board fault codes rather than guesswork. Heat pump heating repairs in Fort Myers typically run $150-$700 depending on the part and access, and the written estimate sets the final price. If the fix belongs on the cooling side, our Blackwell Air Conditioning team handles that on the same visit.
Reversing Valve and Defrost Faults
A heat pump in Fort Myers has to switch modes cleanly, and a stuck reversing valve will leave you with heat on the wrong cycle. We test the valve solenoid and confirm the mode change before touching refrigerant. Defrost boards are the other frequent culprit when the outdoor coil ices in heat mode.
Auxiliary Heat That Won’t Engage
When the heat pump can’t keep up on a cold morning, the auxiliary strip heat is supposed to carry the load. If it doesn’t, the house stays cold while the unit seems to run. We check the sequencer, contactor, and element circuit to find where the staging failed.
Heating Repair
Heating Repair is the general diagnostic and fix work for any warm-air system that won’t heat properly, whether it’s a gas furnace, an electric air handler, or a heat pump in heat mode. You need it when the house won’t reach the thermostat setting, the blower runs continuously, or you smell something hot at the vent. Fort Myers winters are mild, so people often tolerate a struggling system for weeks before calling – which is exactly when small faults turn into cracked heat exchangers and failed blowers. Our technicians have up to 9 years of experience and treat every call as a diagnostic first, so we can actually find the fault instead of proposing a replacement. Heating repairs in Fort Myers typically run $150-$700, and the written estimate sets the final price. Estimates are free before any work begins.
Airflow and Duct Problems
A furnace that heats but doesn’t warm the rooms usually has a duct or blower problem, not a combustion one. Restricted returns, crushed flex duct, and undersized filter grilles all force the blower to work harder. We measure static pressure to confirm before recommending anything.
Noises and Smells Worth Investigating
Rattling, scraping, and a metallic clunk during startup are mechanical. A burning smell or exhaust odor is a safety matter – shut the furnace down and have it looked at. We separate harmless blower noise from faults that need prompt attention.
Boiler Repair
Boiler Repair covers hydronic heating systems – the ones that heat water and push it through radiators or baseboard – which are less common in Fort Myers but still show up in older homes and additions. You’ll need it when a zone stays cold, pressure keeps dropping, the boiler short-cycles, or you find water around the base. Boilers have their own failure patterns: aquastats drift, circulator pumps seize from long idle periods, and expansion tanks lose their charge. Fort Myers humidity accelerates corrosion on exposed piping and valve bodies, so we inspect for that specifically. Boiler repairs typically run $150-$700 depending on the component and whether the system is gas or electric, and the written estimate sets the final price. We diagnose before quoting.
Pressure and Water Loss
A boiler that keeps losing pressure has a leak somewhere – an air vent, a relief valve, or the expansion tank. We check all three before recommending anything. Constant top-offs introduce fresh oxygen and shorten the system’s life.
Zone Valves and Circulation
A cold zone with a warm boiler usually means a stuck valve or a failed circulator, not a boiler fault. We test each zone separately. Once circulation is confirmed, we look at the boiler itself.
Gas Furnace Repair
Gas Furnace Repair is the work required when a gas-fired furnace won’t light, lights and shuts off, or produces an irregular flame – and it’s the one category where you should stop using the system and call, rather than keep retrying. Gas ignition involves the igniter, the flame sensor, and the gas valve, and any of them can fail in a way that lets unburned gas accumulate. We test the ignition sequence, verify flame sensing, and check the flue path before returning the system to service. Fort Myers-area gas furnaces sit idle for months, which causes pilot and sensor problems that wouldn’t appear in a colder climate, so we account for that in the diagnostic. Gas furnace repairs typically run $150-$700, and the written estimate sets the final price.
Safety First With Gas Equipment
If you smell gas, leave the house and call your gas utility before calling anyone else. Do not attempt to relight a furnace repeatedly. Gas work is not a homeowner task, and a heating technician should confirm the system is safe before it runs again.
Short Cycling and Flame Failure
A gas furnace that lights for a minute and drops out has a sensor or pressure-switch problem more often than a gas supply issue. We watch the sequence through a full cycle to see where it fails. That tells us more than any single part test.
Furnace Tune Up
Furnace Tune Up is a shorter, focused service than full maintenance – the clean, test, and adjust visit you book when the furnace is working but you want to confirm it’s running efficiently before the cold season. It covers the flame sensor, igniter condition, burner cleanliness, filter, and a temperature-rise measurement to confirm the unit is operating within spec. In Fort Myers, a tune up makes the most sense in the late fall, before that first cold snap when everyone else is calling. We give you a written report of what we measured and what we found, and our technicians aren’t paid on what they sell, so the recommendation you get is just the recommendation. A furnace tune up in Fort Myers typically runs $80-$200, and the written estimate sets the final price.
What Gets Measured
We track temperature rise, amp draw on the blower, and igniter resistance. Those three numbers tell us far more than a visual inspection. If one falls outside spec, we tell you what it means before quoting anything.
When a Tune Up Isn’t Enough
A tune up can’t fix a failing heat exchanger or a bad gas valve, and it shouldn’t be sold as if it will. If the inspection turns up a real fault, we say so and quote the repair separately. Maintenance is maintenance, not a substitute for repair.

Emergency Furnace Repair
Emergency Furnace Repair is for the situations you can’t sit on: no heat on a cold night, a gas smell, a furnace that trips the breaker repeatedly, or a unit blowing cold air when the house is already uncomfortable. Fort Myers doesn’t get many hard freezes, but the nights that do hit the forties are the ones where an unheated home becomes a genuine concern for elderly residents or small children. We treat these calls as priority work with same-day response when dispatch allows. Emergency furnace repairs in Fort Myers typically run $150-$700; urgency doesn’t change the pricing structure, and the written estimate sets the final price. Call (833) 946-8616 – we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Qualifies as an Emergency
No heat with vulnerable occupants, any gas odor, a burning smell from the vents, or a system that trips breakers. Those get priority. A noisy blower or a room that runs a few degrees cool can wait for a scheduled visit.
What Happens When You Call
We take the details and book the call into the next opening, Sunday through Friday, 7am to 7pm. Bring us the model and the symptom and we can plan the visit before we arrive. Same-day service is available when the schedule allows.
Brands We Service
We repair and service equipment from nine major brands, including Daikin and Bryant alongside Carrier, Trane, Lennox, Goodman, Rheem, York, and American Standard. On Daikin equipment we know how the inverter boards behave in a Fort Myers summer and where the sensors tend to drift; on Bryant systems we’ve learned the common ignition and blower faults that show up after long idle stretches. Brand familiarity matters because it shortens the diagnostic. A technician who’s seen the same fault pattern before spends less of your time chasing it.
We don’t push a single manufacturer. Our recommendations are driven by your home’s load requirements and budget, not by a dealer agreement – which means when we look at a Carrier unit alongside a Goodman unit, we’re comparing on the merits. Whether you have a Daikin, a Bryant, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- No heat at all. The furnace doesn’t light, or the blower never starts. This could be anything from a dead igniter to a failed control board, and testing it yourself won’t narrow it down. Call us before the house gets cold.
- A yellow or flickering flame. A healthy gas flame is blue. Yellow or orange points to incomplete combustion, which produces carbon monoxide. Shut the furnace down and call immediately – this is not a wait-and-see symptom.
- Repeated breaker trips. A furnace that trips the breaker every time it starts has an electrical fault or a failing blower. Repeated resets can damage the compressor or control board. Stop resetting and have it diagnosed.
- Cold air from the vents in heat mode. On a heat pump this points to the reversing valve; on a gas furnace it means the blower is running without ignition. Either way, the system needs a technician to trace the fault.
- Strange smells or soot around the unit. Soot on the furnace cabinet or a persistent exhaust smell means combustion isn’t venting properly. Get it looked at before you run the heat again.
Our Process, Step by Step
- 1
Call and describe the symptom. We take the model, age, and what you’re seeing, and book the visit into the next available dispatch slot. Call (833) 946-8616 – we answer 24/7. Fast dispatch from 7am to 7pm.
- 2
Diagnose on site. Our technician runs the system through a full heating cycle, watches the ignition sequence, and measures temperature rise, amp draw, and airflow. We use a combustion analyzer and a manometer where the fault points to venting or gas pressure.
- 3
Explain what we found. You get the diagnosis in plain language, the parts involved if any, and a written estimate with the price. We quote the repair, not a replacement, unless the repair genuinely doesn’t make sense.
- 4
Repair or recommend. We fix the fault on the same visit when the part is on hand and the schedule allows. If the system is beyond economical repair, we walk you through the options – including furnace replacement if that’s the honest answer.
- 5
Test and confirm. After the repair, we re-run the full cycle, recheck the temperature rise, and confirm the unit is operating within spec. You get a written record of what was done.
How Much Does Furnace Repair Cost in Fort Myers?
Most furnace repairs in Fort Myers fall between $150 and $700, and the final number depends on the part, the access, and whether the fix is a straightforward component swap or a deeper diagnostic. A typical igniter or flame sensor replacement runs toward the lower half of that range. A blower motor or control board replacement lands near the upper end. A heat exchanger replacement or a gas valve swap sits at the top and sometimes argues for a replacement quote instead.
What affects the price most is where the fault is. Electrical and ignition components are quick to reach and quick to test. Blower assemblies and heat exchangers take more time to access, which drives the labor. System age matters too – if the furnace is older, a repair may be worth doing but not worth doing twice, so we’ll say so. The most useful thing you can bring to the call is the model number and the symptom, which shortens the diagnostic.
How to avoid overpaying: get a written estimate before work starts, and be wary of anyone who quotes a replacement before diagnosing the failure. Asking for the repair estimate in writing, with the part named, keeps the decision yours.
Every Blackwell estimate is free, and the written estimate sets the final price. Call (833) 946-8616 for an exact number – we answer 24/7.
Our Service Area Near Fort Myers
We dispatch to Fort Myers and the surrounding communities, including Pine Manor, Whiskey Creek, Villas, Suncoast Estates, Cypress Lake, Iona, Estero, Fort Myers Beach, and St. James City. Response windows depend on the day, but same-day service is available for priority calls. For nearby coverage, see our furnace repair and furnace repair pages for the same service across those neighborhoods. Call (833) 946-8616 with your address and we’ll confirm the dispatch window.
Serving Fort Myers, FL – Our Local Coverage Area
We serve Fort Myers and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Furnace Repair in Fort Myers
Furnace repair is the diagnostic and fix work on any heating system that isn’t operating correctly – ignition faults, blower failures, control board problems, gas valve issues, and heat exchanger concerns. It’s the work that finds the actual fault, not the work that swaps the whole unit. We handle furnace repair on nine major brands, including Daikin and Bryant, and we test the system through a full heating cycle before calling it done. Call (833) 946-8616 for a free estimate – we answer 24/7.
Most furnace repairs are completed in a single visit of one to three hours, depending on the part and access. Igniter and flame sensor swaps are quick; blower motor or heat exchanger repairs take longer. If the part isn’t on hand, we schedule the follow-up visit with a firm time and a written estimate for the work. Call (833) 946-8616 to schedule.
Furnace repair in Fort Myers typically runs $150-$700, depending on the component and the labor involved. A furnace tune up is a smaller job at $80-$200. The written estimate you get after the diagnostic sets the final price, and estimates are free. Call (833) 946-8616 for an exact quote.
Yes – we service Carrier and American Standard along with Trane, Lennox, Goodman, Rheem, York, Daikin, and Bryant. We’re brand-neutral, so our recommendation comes from the system’s load requirements and your budget, not a dealer agreement. If you want to confirm your model before the visit, have the model number ready when you call. Call (833) 946-8616 – we answer 24/7.
Same-day service is available when the dispatch schedule allows, and priority calls go first. We answer the phone 24/7, and we dispatch technicians from 7am to 7pm, Sunday through Friday. We’re closed on Saturday; a call outside dispatch hours is booked into the next opening. Call (833) 946-8616 to book.
Repair work and parts are covered by the warranty terms on the written estimate – ask and we’ll walk you through what applies to your specific repair. Manufacturer warranties on parts vary by brand and by the age of the equipment, and we’ll tell you what’s still in play. Get the details in writing before the repair starts. Call (833) 946-8616 for a quote.
Clear access to the furnace, know where the gas shutoff and the breaker are, and have the model number handy. Note the symptom – when it happens, how often, and any noises or smells – because that information shortens the diagnostic. If you use a thermostat schedule, tell us what it’s set to. Call (833) 946-8616 to schedule.
Schedule Your Furnace Repair Service in Fort Myers Today
Whether it’s a no-heat call, a tune up before the cold season, or a heat pump that won’t switch modes, we can help. Call (833) 946-8616 – we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, the price is set in writing, and we repair before we recommend replacement. If you’d rather start at the top, see our Blackwell Air Conditioning page or our furnace replacement options.
Written by the team at Blackwell Air Conditioning.